The world is going digital, and video editing has become an essential part of the marketing process. As a result, many people are looking for ways to make their computer run faster in order to handle all of the footage they need to edit. Which should you use: DDR3 or DDR4? This article talks about the pros and cons of both options so that you can decide which one is best for your needs!
DDR3 vs. DDR4 for Video Editing
DDR3 is a type of RAM that has been around for a while. It usually comes in packages of two, four, or eight gigabytes (GB) and is often used as system memory.
DDR4 is an improved version of DDR3. It is the newest type of RAM commercially available. DDR-DDRAM works at higher speeds than its predecessor, which makes it a better choice for people who need to edit video on their computers or run other memory-intensive applications that require rapid data access.
Physically, DDR4 looks similar to DDR3. You may not notice with your own eyes, but DDR4 has 288 pins, whereas DDR3 only has 240 pins. Furthermore, you will find the key notch in a different place on the DDR4 and the design makes it easier to insert.
I recommend the Corsair VENGEANCE RGB PRO (Amazon link) if you want a DDR4 for editing.
Is DDR4 Better than DDR3 for Video Editing?
Less energy consumption – The DDR4 modules use 1.2 volts of power to operate, while the DDR3 has voltages ranging from 1.5V to 1.35V. DDR4 is more energy efficient, which means it will have less of a negative impact on the environment and your household budget. The reduced power consumption also allows for higher speeds without rising cooling or power costs because it can operate efficiently with lower voltage levels.
Better performance in heavy workloads – DDR4 offers better stability and responsiveness when it is handling a high-workload. This means that your system will be more stable, which translates into less crashes or glitches during editing. It also has much faster read/write speeds than its predecessors so you won’t have to wait as long for data access like you would on DDR3.
What is RAM?
RAM is a type of computer memory that can be accessed very quickly. It typically consists of semiconductor chips containing capacitors for storing electrical charge and transistors which store data in the form of electric pulses, making RAM faster than hard drives or other storage media. The different types are: DDR, SDRAM, RDRAM.
DDR stands for Double Data Rate because it sends twice as many bits per clock cycle – this means it has higher bandwidth but smaller capacity when compared to single-data rate memories like SDRAMS and its successor DDRs II/III (which were also called “double data rate” until Samsung’s marketing department named them). DDRs III uses an improved signalling technology with reduced voltage levels so they can be used for faster and lower power consumption.
DDRs IV is the latest in this series but it’s still not a mainstream technology, although that may change soon as DDR production has been discontinued – some companies might stop manufacturing them because they are much more expensive to produce than its successors.
They do however higher bandwidth rates have (by about 50%) and consume less energy when compared to DDRIII or even GDDR GPUs which both use DRAM memory with similar properties.
All these technologies can’t be used on one motherboard, so you will need to carefully plan your hardware purchases before buying any of the components involved.
Is DDR Better than DRAM for Video Editing?
DDR RAMs work best for tasks that require a lot of data to be processed at once, like video editing. The problem with DDR is the cost: it’s more expensive than DRAM and doesn’t perform as well in general use, so you’re paying extra just for these specific applications.
DDR also uses up about twice as much power as DRAM (which makes sense since there are two sets of wires instead of one). Lastly, because they have wider raisers on them, they take up more space than standard DRAM modules. Overall, it’s worth getting using DDR if you’re a professional video editor.
Conclusion
Both have their own pros/cons that could come into play depending on what type of tasks your computer does best – but generally speaking with video editing processes specifically, we would highly recommend getting the DDR4 as it will allow for a smoother performance with less crashes.